Cleaning equipment is an essential process in every factory or production workshop. Timely cleaning ensures production efficiency and extends the lifespan of equipment. Ultra-high pressure cleaners, a popular cleaning device, are found in many fields. They are environmentally friendly and energy-saving, making them a top choice for cleaning equipment. Below, we'll learn how to use an ultra-high pressure cleaner and what preparations are needed before use.
How to Use an Ultra-High Pressure Cleaner
1. Water Source: Ultra-high pressure cleaners must use water free of impurities and large particulate contaminants. Regularly replace and inspect the filter.
2. Power Supply: This type of cleaning equipment has high power; the power cord cannot be too thin. 50 square millimeter copper wire is required. If the power cord is longer, 75 square millimeter copper cable should be used. Ensure the wires are not reversed; otherwise, the motor will rotate in either direction, the indicator light will not illuminate, and the machine will not start.
3. Two people are needed to operate the cleaning machine daily for higher efficiency.
4. Before starting the machine, ensure the pressure regulating valve is in the loose position.
5. Do not press the foot pedal valve first. Always start the booster pump to increase pressure, then start the main pump. Adjust the pressure only after both are started.
6. When adjusting the pressure, do not rush. Adjust the pressure slowly until the cleaning requirements are met. Do not use excessive pressure, as this can damage the machine. After adjusting the pressure to the correct level, stabilize the pressure before starting work.
7. After use, turn off the machine. First, adjust the pressure. If the pressure does not decrease, directly stopping the machine may cause the valve to jam. Then turn off the main pump and booster pump, and finally turn off the power.
Necessary Preparations Before Using an Ultra-High Pressure Cleaner
To ensure proper operation and normal machine function, all necessary preparations must be made before use.
1. First, check if any parts of the machine are loose. If so, tighten them immediately. Then check the high-pressure nozzle and pipelines for damage. Repair any damage promptly to avoid danger during use.
2. Ensure connections are secure and leak-free. The water tap should be directly connected to the machine without any adapters to prevent impurities from entering and damaging the machine.
3. After ensuring the inlet and outlet water pipes are properly connected, turn on the machine for testing. Always carefully read the instruction manual before using the ultra-high pressure washer to ensure safe operation.An ultra-high pressure washer is a device that uses high-pressure water jets for cleaning and is widely used in various industries.